INTERNATIONAL
MAXI-PRESS has optimised its spring covering for industrial ironers to the latest technical standard with its newest model MP-X-Spring Pro. It is an in-house development by the spare parts specialist and is characterised above all by the selection of 100% stainless steel to make the springs which are therefore completely rust-free, even over long operating cycles.
When using the MP-X-Spring Pro spring covering, says Maxi-Press, launderers can achieve the optimum cylinder circumference of the ironer with a contact pressure of just 1 bar. The lower resistance of the cylinders protects the gears of the ironer and leads to increased energy savings. Due to the improved exhaust air of the spring, there is also less cloth wear.
In addition, the band cannot break off, unlike common spring coverings, and is chemical resistant, which is particularly useful for hospital laundry operations. MP-X-Spring Pro guarantees optimum ironing performance over the entire service life, an ideal linen finish and, thanks to the perfect fit of the ironer textile, also a longer running time of the textile, says Maxi-Press.
The system is suitable for any ironer type and cylinder size. The spring height can be selected as required between 8 and 15 millimetres in 0.5 millimetre increments, and the width of the spring band is 50 millimetres. The endless belt can be shortened or lengthened as required and the premium product MP-Felt 800 Pro, as well as all other aramid and polyester ironer textiles from Maxi-Press, are a perfect match.
MP-X-Spring Pro is made in Germany, which says the company, guarantees highest precision. The Maxi-Press service team will carries out the professional installation of the MP-X-Spring Pro as well as changing the ironer textile.
